FLIR identiFINDER R700
Highly Sensitive, Lightweight Backpack Radiation Detector (BRD)
The FLIR identiFINDER R700 Backpack Radiation Detector (BRD) offers a hands-free capability for broad area radiological search and monitoring missions. The identiFINDER R700 provides the user all that is required to successfully perform wide-area searches quickly, efficiently and confidently. Providing the ultimate versatility, the identiFINDER R700 can be placed for stationary monitoring at makeshift checkpoints, fence-line monitoring, and other temporary screening locations. When coupled with radiation monitoring software, the identiFINDER R700 can be used as a fixed-site monitoring tool.
Building on the award-winning identiFINDER R440, the R700 offers an advanced spectroscopic algorithm and detection techniques scaled up to a man portable backpack for increased sensitivity and speed. The R700’s capabilities configured as a backpack or a stationary device allow multiple mission sets from wide area searches to temporary check points. Providing critical information to decision makers quickly is essential. The R700 provides the capability to do so in real time and on demand.
Building on the award-winning identiFINDER R440, the R700 offers an advanced spectroscopic algorithm and detection techniques scaled up to a man-portable backpack for increased sensitivity and speed.
- Large 2” x 4” x 8” detector allows for rapid detection and identification of even the smallest radiation sources; source-less “quantum gain” stabilization improves data collection, reducing false positives
- 360° EasyFinderTM mode collects and interprets data to pinpoint radiation at the source, enabling faster location of threats
Providing critical information to decision makers quickly is essential. The R700 provides the capability to do so in real-time and on demand.
- Built-in wireless communications and a robust API enable integration with user-deployed networks. ANSI N42.42 data output is standard for easy integration
- Tethered-display versions will provide a radio silent (air-gapped) option for highly sensitive missions
The identiFINDER R700 can be configured as a nondescript backpack or a stationary screening device, allowing for multiple mission sets from covert wide-area searches to temporary checkpoints.
- Unmarked backpack form-factor and mobile phone-based user interface allow operators to detect radiological threats covertly, even in a crowd
- Included tripod mount enables stationary deployment for remote radiation monitoring. The rugged and weatherproof IP67 design operates in the harshest weather conditions
Specifications
- Detector
- 2 × 4 × 8" (51 × 102 × 204 mm) NaIL gamma-neutron detector or
2 × 4 × 8" (51 × 102 × 204 mm) NaI gamma with neutron indication - Dose Rate Range [Cs_137]
- 0.001 mrem/h - 10 rem/h (0.01 - 100,000 µSv/h)
ID Mode 0.001 - 0.5 mrem/h (0.01 - 5 µSv/h) - Energy Range [Gamma]
- 10 keV to 10 MeV (All detectors)
- Gamma Sensitivity [Cs–137]
- 165,000 cps/mrem/h (16500 cps/uSv/h)
- Global Positioning System [GPS] [removable]
- 72-channel u-blox M8 engine
- Linearization
- Real-time linearization of gamma energy
- Neutron Sensitivity [NaIL]
- 90 cps/nv
- Overload Dose Rate Range
- 0.001 mrem/h - 10 rem/h (0.01 - 100,000 µSv/h)
- Service Interval
- 5 year factory maintenance recommended, not required
- Stabilization
- Sourceless “Quantum gain” stabilization (patents pending)
- Typical Resolution
- < 8.5% FWHM at 662 keV (20°C)
- Library Categories
- SNM, SNMR, IND, MED, NUC, NORM, UKN
- Sample Introduction
- Absorption of EM gamma (NaI) or gamma and neutron emissions (NaIL)
- Time to Alarm
- From a few seconds to minutes
- Time to Identification
- Depends on gamma exposure, typically < 2 min
- Nuclide Identification
- Exceeds ANSI N42.53
- Standards Compliance
- ANSI N42.53 BRD standard fully compliant
ANSI N42.42 data format fully compliant
IEC 62694 backpack standard fully compliance
IEC 62706 BRD environmental compliant
IEC 62755 data format fully compliant
- Technology
- Backpack Radiation Detector (BRD)
- Threats
- Detects gamma and/or neutron radiation emitted from natural occurrences in the environment, special nuclear material, industrial, or medical material
- Communication
- USB 2.0, USB OTG; Bluetooth® Class BLE 4.0 and 2.1 with EDR, ≤30m range (can be disabled at manufacture)
- Data Storage
- 32GB internal memory
- Software
- On-board web server software
- Training Requirements
- <10 mins for operator; 1 day for advanced user
- Dimensions (L x W x H)
- ≤17 × 12 × 20 in (≤43.2 × 30.5 × 50.8 cm)
- Enclosures & Packaging
- Impact resistant plastic; protection rating IP67 according to IEC 60529 (3.3 (1 m') submergible)
- Weight
- ≤22 lbs (≤10 kg)
- Operating Humidity
- 10 to 100% non-condensing (IP67)
- Operating Temperature
- -4° to 122°F (-20° to 50°C)
- Storage Temperature
- -4° to 104°F (-20° to 40°C)
- Input Voltage
- 100-240V AC (wall adapter and USB cable supplied)
- Battery Specs
- 2x rechargeable Li-Ion smartpacks (hot-swappable) runtime per Li-Ion smartpack
> 18 h runtime with dual batteries
> 9 h runtime with single battery pack - Cold Start Time
- <5 mins from cold start
R700 Mobile App
A mobile device with the "R700 Mobile App" is the main control and display unit for the identiFINDER R700. Even though the identiFINDER R700 executes all essential functions on the device and can be operated via the User Interface, the operation of the identiFINDER R700 only makes sense in combination with the R700 Mobile App on a mobile device. The R700 Mobile App is a available for iPhones with iOS version higher than 12.0.
