Honeywell

MiniRAE 3000 +

The MiniRAE 3000 + is a comprehensive handheld VOC (Volatile Organic Compound) monitor that uses a third-generation patented PID technology to accurately measure one of the highest levels of ionizable chemicals available on the market.


MINIRAE  3000 +

Portable Handheld VOC Monitor

Whether for industrial hygiene, leak detection, or HazMat response, the MiniRAE 3000 + delivers one of the most advanced VOC monitoring capabilities on the market. With a photoionization detector (PID) that has an extended detection range from 0-15,000 ppm, a rapid three-second response time, built-in correction factors for more than 200 compounds, patented auto-cleaning sensor technology and Reflex PID Technology™, the MiniRAE 3000 + can measure one of the highest levels of ionizable chemicals available on the market.

The powerful sample pump draws through up to 100 feet of tubing horizontally or vertically. A built-in flashlight to help navigate in darker environments and an IP 65/67 dust-tight and water-proof housing all add up to a device that performs reliably even in harsh conditions.

MiniRAE 3000 + is solution oriented through multiple connected options. A dedicated mobile APP has been developed for Remediation engineers and Industrial Hygienists. Instrument is also available with real time connectivity which can relay readings and alarm status up to 2 miles to a RAELink 3 wireless transmitter.

  • Highly accurate VOC measurements

  • Reflex PID Technology

  • VOC detection range from 0 to 15,000 ppm

  • Humidity compensation with built-in humidity and temperature sensors

  • Low maintenance — easy access to lamp and sensor

  • Low cost of ownership

  • 3-year 10.6eV lamp warranty

  • BLE module & dedicated APP for Enhanced Datalogging capability

Proven Technology

Third-generation patented PID technology

  • Most advanced handheld VOC monitor on the market

  • PID measures from 0-15,000 ppm

  • Patented PID lamp auto-cleaning technology

Rapid and Accurate Results

Results you can trust, in seconds

  • 3-second response time

  • Humidity compensation with built-in humidity and temperature sensors

  • Patented Reflex PID Technology

Rugged and Reliable

Rugged housing withstands use in harsh environments

  • IP67 waterproof design for easy cleaning and decontamination in water

  • Built-in flashlight

  • Strong protective removable rubber boot

Instrument Specifications

Size
10” L x 3.0” W x 2.5” H (25.5 cm x 7.6 cm x 6.4 cm)
Weight
26 oz (738 g)
Sensors
Photoionization sensor with standard 10.6 eV or optional 9.8 eV or 11.7 eV lamp
Battery
Rechargeable, external field-replaceable Lithium-Ion battery pack
Alkaline battery adapter
Running time
16 hours of operation (12 hours with alkaline battery adapter)
Display Graphic
4 lines, 28 x 43 mm, with LED backlight for enhanced display readability
Keypad
1 operation and 2 programming keys, 1 flashlight on/off
Direct Readout
Instantaneous reading
VOCs as ppm by volume (mg/m³)
High values
STEL and TWA
Battery and shutdown voltage
Date, time, temperature
Alarms
95dB at 12” (30 cm) buzzer and flashing red LED to indicate exceeded preset limits
High: 3 beeps and flashes per second
Low: 2 beeps and flashes per second
STEL and TWA: 1 beep and flash per second
Alarms latching with manual override or automatic reset
Additional diagnostic alarm and display message for low battery and pump stall
EMC/RFI
Compliant with EMC directive (2004/108/EC) EMI and ESD test: 100MHz to 1GHz 30V/m, no alarm
Contact: ±4kV
Air: ±8kV, no alarm
IP Rating
IP-67 unit off and without flexible probe
IP-65 unit running
Datalogging
Standard 6 months at one-minute intervals

Instrument Specifications (cont'd)

Calibration
Two-point or three-point calibration for zero and span
Reflex PID Technology
Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates
Sampling Pump
Internal, integrated flow rate at 500 cc/mn
Sample from 100’ (30m) horizontally or vertically
Low Flow Alarm
Auto pump shutoff at low-flow condition
Communication & Data Download
Download data and upload instrument set-up from PC through charging cradle or using BLE module and dedicated APP
Wireless data transmission through built-in RF modem
Wireless Network
Mesh RAE Systems Dedicated Wireless Network
Wireless Range (Typical)
Up to 15ft (5m) for BLE
EchoView Host: LOS > 660 ft (200 m)
ProRAE Guardian & RAEMesh Reader: LOS > 660 ft (200 m)
ProRAE Guardian & RAELink3 Mesh: LOS > 330 ft (100 m)
Safety Certifications
US and Canada: CSA, Classified as Intrinsically Safe for use in Class I, Division 1, Groups A, B, C, D
Europe: ATEX II 2G EEx ia IIC T4
Temperature
-4° to 122° F (-20° to 50° C)
Humidity
0% to 95% relative humidity (non-condensing)
Attachments
Durable bright yellow rubber boot
Warranty
3 years for 10.6 eV lamp, 1 year for pump, battery, sensor and instrument
Wireless Frequency
ISM license-free band. IEEE 802.15.4 Sub 1GHz
Wireless Approvals
FCC Part 15, CE R&TTE, Others
Radio Module
Supports BLE or Bluetooth or RM900

Sensor Specifications

Gas MonitorRangeResolutionResponse Time T90
VOCs0 to 999.9 ppb
1,000 to 15,000 ppm
0.1 ppm
1 ppm
< 3 sec
< 3 sec

MiniRAE3000 User Guide

Top 5 Things You Should Know – MiniRAE 3000 PID Detector