FLIR
MUVE C360
The MUVE C360 is a multi-gas detector completely integrated with an unmanned aerial system (UAS) to provide real-time continuous monitoring of chemical hazards while on the move. The sensor block boasts 8-channels, which includes a photoionization detector (PID), Lower Explosive Limit (LEL) detector, and six other sensors. The integrated snorkel is designed to negate the effects of rotor wash, extending past the propellers to sample the unperturbed air. The MUVE C360 sensor block quickly latches to a proprietary integration dock mounted to the UAS. The calibration station features the same dock, so the operator can easily connect for routine sensor verification.
MUVE 360
Integrated Multi-Gas Detector
The MUVE C360 will transform how emergency response teams approach chemical, industrial, or environmental incidents by providing a new level of safety, dramatically reducing time to action, and delivering a more complete assessment in situations where every second counts. The C360 is currently compatible with the DJI Matrice 210 UAS platform. Before putting the health and safety of response teams at risk, drone pilots will be able to fly the new MUVE C360 into a scene for initial assessment. The C360 houses a photoionization detector, plus a suite of advanced electrochemical sensors that provide real-time continuous monitoring of chemical hazards such as chlorine, carbon monoxide, and other combustible gases. This capability will enable emergency response teams to assess situations remotely and select the proper personal protective equipment. Fire crews will be able to monitor air quality surrounding active scenes before entry, and industrial experts can perform inspections in hard-to-reach areas with relative ease.
8-channel sensor block. delivers broad hazard coverage.
Preset alarm thresholds to make quicker decisions on-scene
FLIR VueLink App provides plug-and-play on the included iPad tablet
Analyze complex data in an easy-to-understand visual overlay
ASSESS THE SCENE FROM A SAFE DISTANCE
Before putting the health and safety of your team at risk, fly the C360 into the scene to gather an initial assessment of hazards
Analyze air quality surrounding active scenes prior to entry
Select proper PPE before entering the scene
Deploy the C360 on the scene in the time it takes the average responder to suit up
SIGNIFICANTLY REDUCE THE TIME TO ACTION
Deploy the C360 on the scene in the time it takes the average responder to suit up
Cover difficult terrain from the air to assess hazards
Quickly draw a perimeter to assess and map hazards
Preset alarm thresholds to make quicker decisions on-scene
FULLY INTEGRATED SITUATIONAL AWARENESS
Get a comprehensive overview of an active scene including visuals and chemical identification
FLIR VueLink App provides plug-and-play control of the C360, flight operations, and other on-board sensors
Analyze, log, and access complex data in an easy-to-understand visual overlay
Install with click-in simplicity via onboard integration dock
System Overview
- Battery Specs
- Powered by the UAS
- Compatibility
- Currently compatible with DJI Matrice 210, V1 and V2, M300, UAS
- Sampling & Analysis
- Real-time-detection
- Training Requirements
- Less than 30 mins for operator; 4 hours for advanced user
- Sensors
- CO, Cl₂, O₂, NO₂, H₂S, SO₂, LEL
- PID
- VOC 10.6 eV (ppm)
- Total Weight Payload
- 1.5 lb (680.39 g) - C360 with dock and snorkel
Power
- Cold Start Time
- 90 seconds from cold start
- Input Voltage
- 24V DJI Matrice 210; 12V FLIR Calibration Station
Enviromental
- Operating Temp & Humidity
- -4 to 122 °F (-20 to 50 °C) 10 to 93%, non-condensing
- Storage Temperature
- -22 to 158 °F (-30 to 70 °C)
- Environmental Protection
- IP43-rated
Physical Features
- Dimensions (L x W x H)
- 6.5 x 2.3 x 2.0" (16.51 x 5.84 x 5.08 cm) - C360 only
- Integration Dock
- Proprietary quick-connect mount for UAS and FLIR Calibration Station
Sensor Block Technology
- FLIR Calibration Station
- Proprietary automatic calibration design, includes tubing and power adaptor
System Interface
- Communication
- Remote controller via USB-A accessory (tablet); UAS power port and serial (C360)
- Data Storage
- Sensor data and flight information logged on tablet
- Wireless Range
- Determined by the UAS range
- Display & Alerts
- FLIR VueLink™ application integrated via tablet connected to the UAS remote controller
Sampling & Analysis
- Sample Introduction
- Actively pumped via integrated snorkel
- Sample Rate
- 300 ml/min minimum
Teledyne FLIR MUVE™C360
Introducing the FLIR MUVE™ C360 Multi-Gas Detector for UAS | CBRNE Detection
FLIR MUVE™ C360 sensor for airborne gas detection.