DJI

Zenmuse P1

The Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for photogrammetry flight missions, it takes efficiency and accuracy to a whole new level.


Zenmuse P1

Efficiency through Flexible Full-frame Photogrammetry

The P1 includes a full-frame, low-noise high-sensitivity sensor that can take a photo every 0.7 seconds during the flight, and covering 3 km² in a single flight. Equipped with a global mechanical shutter and the all-new TimeSync 2.0 system, which synchronizes time across modules at the microsecond level, the Zenmuse P1 lets users capture centimeter-accurate data combined with the real-time position and orientation compensation technology. Create 2D, 3D, and detailed models thanks to the integrated 3-axis gimbal that can be outfitted with 24/35/50mm lenses and the Smart Oblique Capture feature. Cover 7.5 km² in a single workday with the P1. Elevate the efficiency of your oblique photography mission using Smart Oblique Capture, where the gimbal automatically rotates to take photos at the different angles needed. Only photos essential to the reconstruction will be taken at the edge of the flight area, increasing the efficiency of post-processing by 20% to 50%.

When it comes to industrial inspections, there’s a lot at stake - the extremely valuable equipment and assets being inspected, the pricy drone and camera zipping through the air, personnel safety, the requirement for accurate and usable data to be gathered, etc. With these factors in mind, it just makes sense to employ aerial imaging solutions that minimize risks to each element involved. One such method is the use of powerful zoom cameras that can maintain a safe distance from a subject or inspection target, and still gather the high-resolution, detailed images you need.

  • Accuracy without GCPs 3 cm horizontally / 5 cm vertically

  • High Efficiency 3 km2 covered in a single flight

  • 45 MP Full-frame Sensor

  • 3-axis Stabilized Gimbal Smart Oblique Capture

  • TimeSync 2.0 - synchronization at the microsecond leve

Extraordinary Efficiency

The P1 includes a full-frame, low-noise high-sensitivity sensor that can take a photo every 0.7 s during the flight, and covering 3 km2 [2] in a single flight.

Remarkable Accuracy

Equipped with a global mechanical shutter and the all-new TimeSync 2.0 system, which synchronizes time across modules at the microsecond level, the Zenmuse P1 lets users capture centimeter-accurate data combined with the real-time position and orientation compensation technology.

Robust Versatility

Create 2D, 3D, and detailed models thanks to the integrated 3-axis gimbal that can be outfitted with 24/35/50mm lenses and the Smart Oblique Capture feature.

General

Product Name
ZENMUSE P1
Dimensions
198×166×129 mm
Weight
Approx. 800 g
Power
20W
IP Rating
IP4X
Supported Aircraft
Matrice 300 RTK
Operating Temperature Range
-20° to 50° C (-4° to 122° F)
Storage Temperature Range
-20° to 60° C (-4° to 140° F)
Absolute Accuracy: Horizontal
Horizontal
3 cm
Vertical
5 cm

Video

Video Format
MP4
Video Resolution
16:9 (1920×1080)
16:9 (3840×2160)
Frame Rate
60 fps

Gimbal

Stabilized System
3-axis (tilt, roll, pan)
Angular Vibration Range
±0.01°
Mount
Detachable DJI SKYPORT

Sensor

Sensor size (still)
35.9×24 mm (Full frame)
Sensor size (Max video recording area)
34×19 mm
Effective Pixels
45MP
Pixel Size
4.4 μm
Supported Lenses
DJI DL 24mm F2.8 LS ASPH
DJI DL 35mm F2.8 LS ASPH
DJI DL 50mm F2.8 LS ASPH
Supported SD Cards
SD: UHS-I rating or above; Max capacity: 512 GB
Storage Files
Photo / GNSS Raw Observation Data/ Image Log File
Photo Size
3:2 (8192×5460)
Operation Modes
Photo, Video, Playback
Minimum photo interval
0.7s
Shutter Speed
Mechanical Shutter Speed
Electronic Shutter Speed
Aperature Range
f/2.8-f/16
ISO Range
Photo
100-25600
Video
100-2560

DJI Enterprise Zenmuse P1 - Full-Frame Photogrammetry Solution

DJI Zenmuse P1 Mapping and Surveying Workflow - Construction Site Case Study