-
Low cost versatile solution
-
Compact, weatherproof, NEMA 4X enclosure
-
115/220 VAC or 24 VDC operation
-
Long life sensors (2+ years typical)
-
Accepts RKI LEL/O2/H2S/CO direct connect sensors
-
Accepts any 4-20 mA transmitter
-
Audible alarm with reset button
-
Two programmable alarm levels
-
Built-in trouble alarm with relay
-
Relay rating 10 amps, form C
-
Provides 4-20 mA output
-
10 amp rated relays power external alarms and horns
-
Digital display with backlighting and simultaneous readout of gas type and concentration
-
Complies with lock out / tag out standards and can be fully secured
-
External reset switch
-
Includes wall mounting kit
Beacon 110
$0.00
The RKI Instruments Beacon 110 is a single-channel fixed gas detection controller designed for facilities requiring reliable, cost-effective monitoring of combustibles, oxygen, hydrogen sulfide, or carbon monoxide.
In stock
The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry’s best value single gas detection controller. Capable of accepting RKI sensors directly for LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide. Can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Features compact weatherproof NEMA 4X enclosure, 115/220 VAC or 24 VDC operation, long life sensors (2+ years typical), audible alarm with reset button, two programmable alarm levels, built-in trouble alarm with relay, 10 amp relay rating form C, and 4-20 mA output. Digital display with backlighting shows gas type and concentration simultaneously. Wall mounting kit included.
Description
Beacon 110
The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry’s best value single gas detection controller. Capable of accepting RKI sensors directly for LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide. Can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Features compact weatherproof NEMA 4X enclosure, 115/220 VAC or 24 VDC operation, long life sensors (2+ years typical), audible alarm with reset button, two programmable alarm levels, built-in trouble alarm with relay, 10 amp relay rating form C, and 4-20 mA output. Digital display with backlighting shows gas type and concentration simultaneously. Wall mounting kit included.
Features
Specifications
- Dimensions
- Height: 8.5″ 216 mm, Width 7.0″ 178 mm, Depth 4.3″ 109 mm
- Enclosure
- Wall mounting grey polycarbonate with hinged cover.
- Conduit Connection
- 3/4″ NPT conduit hubs, 2 provided. 1 for sensor wiring, 1 for power & relay wiring
- Wiring Termination
- Screw type terminal block 14 gauge max.
- Power
- Universal 115 VAC & 220 VAC, or 24 VDC nominal, battery backup option available
- Controls
- 3 internal push buttons for setup, programming, and calibration. 1 external push button for alarm reset
- Operating Temperature
- -4°F to 122°F (-20°C to 50°C)
- Storage Temperature
- -4°F to 158°F (-20°C to 70°C)
- Relative Humidity
- 0 – 80% RH
- Enclosure Rating
- NEMA-4X enclosure, waterproof, chemical, and weather resistant.
- Direct Wired Sensors
- LEL, Oxygen, Carbon Monoxide, Hydrogen Sulfide. Remote amp not required for less than 500 feet.
- 4-20 mA Sensors
- Accepts any 4-20 mA transmitter (24 VDC, 2 or 3 wire). Wiring distances up to 5000 feet
- Sampling Methods
- Diffusion and sample draw heads available.
- Relays
- 3 relays – 10 amp rating (at 115 VAC), SPDT isolated contacts. 2 relays for gas alarms and 1 trouble relay. Relays fully programmable for: increasing or decreasing alarm, latching or self reset, normally energized or normally de-energized, time delay for alarm on and alarm off
- 4-20 mA Output
- Signal output, 4-20 mA (maximum load impedance 500 ohms), per channel
- 24 VDC Output
- 24 VDC (400 mA max) output provided to operate sample drawing adapters or other accessories
- Display
- 2 x 8 Alphanumeric display with backlighting.
- Audible Alarm
- Built-in audible alarm, 94 dB, mounted on enclosure. Coded output: pulsing = gas alarm, steady = fail
- Visual Indication
- 3 LED’s on the front cover for alarm status indication, and malfunction
- Warranty
- One year materials and workmanship
Resources
You May Also Like
Related products
Petzl I’D L
Price range: $384.95 through $399.95 Select options This product has multiple variants. The options may be chosen on the product page
