No products in the cart.

  • Teledyne FLIR · Explosives trace detection

    Fido X2

    Ultra-Portable Explosives Trace Detector

    An ultra-lightweight, handheld explosives trace detector (ETD) at less than 1.5 pounds. Swipe a surface, insert the sample, and TrueTrace® analysis returns a go/no-go answer in ten seconds, with on-screen prompts guiding the officer from power up to power down.

    < 1.5 lbHandheld ETD
    ≤ 10 sAnalysis
    3 minStart-up from cold
    NoneRadioactive source
    Teledyne FLIR Fido X2 handheld explosives trace detector, front view with sample port on top and colour display
    Go / no-goSimple alarms
    Carry anywhere

    The checkpoint goes where you go

    Teledyne FLIR built the Fido X2 for maximum portability: a durable, ergonomic handheld that law enforcement uses at random or entry control checkpoints, or during elevated threat patrol.

    Fido X2 shown with length and width dimension lines L 32.2 cm W 10.0 cm
    Dimensions (L x W x H): 32.2 x 10.0 x 7.2 cm
    Length32.2 cm
    Width10.0 cm
    Height7.2 cm
    <1.5lb

    Under 1.5 lb (680 g). Built for maximum portability, with a durable, ergonomic design and a rechargeable, swappable Li-ion battery.

    Where Teledyne FLIR says it screens

    • Sporting arenas
    • Mass transit facilities
    • Hotels
    • Other critical venues

    On-screen prompts guide security officers through operation, so they can confidently clear vehicles and personal belongings passing through a security checkpoint.

    Gloved hand holding a Fido X2 inside a vehicle cabin, display prompting Insert sample and hold
    Vehicle screening · display prompt: "Insert sample and hold"
    Sampling workflow

    Swipe, insert, decide

    From power up to power down, the Fido X2 guides the user through operation. On-screen prompts and go/no-go alarms aid the operator with sampling and decision-making.

    1. 3 min from cold

      Power up

      Fast three-minute start-up. Runs from the supplied 100-240 VAC wall adapter while it charges the battery.

    2. Swipe

      Sample the surface

      Sampling swipes for surfaces collect trace particulate. The swipes are reusable.

    3. Insert

      Insert and hold

      On-screen prompts guide the operator through sampling, including “Insert sample and hold”.

    4. ≤ 10 s

      TrueTrace analysis

      Analysis in less than ten seconds. One sample detects multiple explosive types, with broad, class-based identification.

    5. Go / no-go

      Decide

      Simple go/no-go alarms. Alerts are visible, audible and haptic (vibration).

    6. Seconds

      Clear down, next sample

      Rapid clear-down within seconds. TrueTrace helps maximise system operational availability.

    Files stored on the device

    10,000 discrete files with first-in, first-out automatic overwrite. Reports are generated on the device, and files can be exported to mass storage. Communication is USB 2.0 (Mini-USB).

    Built for the operator

    Three ways to know, one way to train

    Alerts reach the officer through sight, sound and touch, and refresher training lives on the device itself. Teledyne FLIR says on-device video tutorials reduce the cost burden of recurrent training.

    Visible

    A visible alert on the vivid, sunlight-readable colour display.

    Audible

    An audible alert alongside the on-screen result.

    Haptic

    Haptic (vibration) alerts, felt in the hand.

    Display

    Vivid, sunlight-readable colour display (32k colors), with language translation available worldwide.

    Guided operation

    Help on the device, not in a binder

    On-device video training provides real-time help and reduces the cost and logistical burden of recurrent training.

    • PromptsOn-screen prompts from power up to power down
    • TrainingOn-device video tutorials
    • User levelOperator
    • SafetyNo radioactive ionisation source or hazardous chemicals
    TrueTrace® technology
    “An unprecedented combination of sensitivity, speed, and ease of use.”
    Teledyne FLIR
    • Multi-channel fluorescence. FLIR TrueTrace™ with no radioactive source.
    • Sensitivity. Teledyne FLIR describes TrueTrace as award-winning, detecting threats with higher sensitivity and faster clear-down than similar products.
    • Cost-effective operation. Reusable sampling swipes and fast ten-second analysis.
    • Fielded worldwide. Teledyne FLIR states Fido X-series products have thousands of units fielded in over 40 countries.
    Specifications

    Fido X2 specifications

    Detection
    TechnologyFLIR TrueTrace™; multi-channel fluorescence technology; no radioactive source
    Sample introductionSampling swipes for surfaces
    Sample phaseTrace particulate
    Sampling and analysisAnalysis ≤10 seconds
    Interface
    Display and alertsVisible, audible, and haptic (vibration) alerts; vivid, sunlight-readable colour display (32k colors)
    LocalisationLanguage translation available worldwide
    User levelsOperator
    Data
    CommunicationUSB 2.0 (Mini-USB)
    Data storage10,000 discrete files; First-in, First-out (FIFO) automatic overwrite
    Data managementOn-device report generation; export to mass storage
    Power
    Input voltage100-240 VAC (wall adapter supplied); runs device and charges battery simultaneously
    BatteryRechargeable and swappable Li-ion battery; adapter included
    Startup time3 mins from cold
    Environment
    Operating temperature0 to 45 °C (32 to 113 °F)
    Operating humidity5 to 99%, non-condensing
    Storage temperature-10 to 50 °C (14 to 122 °F)
    Physical
    Dimensions (L x W x H)32.2 x 10.0 x 7.2 cm
    Weight608.4 g
    Enclosure and protectionFlame retardant PC-ABS alloy with aluminum reinforcements
    FAQ

    Questions about the Fido X2

    How fast is an analysis?
    Analysis takes ≤10 seconds, with rapid clear-down within seconds afterwards. From a cold start, the instrument is ready in 3 minutes.
    How much does it weigh?
    Teledyne FLIR describes the Fido X2 as less than 1.5 pounds. The specified weight is 608.4 g, with dimensions of 32.2 x 10.0 x 7.2 cm (L x W x H).
    How are samples collected?
    With sampling swipes for surfaces; the sample phase is trace particulate. The swipes are reusable, which Teledyne FLIR cites as part of the X2's cost-effective operation.
    Does it use a radioactive source?
    No. The technology is FLIR TrueTrace™ multi-channel fluorescence with no radioactive source, and no radioactive ionisation source or hazardous chemicals.
    How do officers get trained and refreshed?
    On-screen prompts guide the operator from power up to power down, and on-device video training provides real-time help, which Teledyne FLIR says reduces the cost and logistical burden of recurrent training.
    How do I get results off the device?
    The X2 stores 10,000 discrete files with first-in, first-out automatic overwrite, generates reports on the device, and exports to mass storage. Communication is USB 2.0 (Mini-USB).
    How is it powered?
    A rechargeable and swappable Li-ion battery. The supplied 100-240 VAC wall adapter runs the device and charges the battery simultaneously.
    Is the Fido X2 export controlled?
    Teledyne FLIR notes the product may be subject to the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) depending on the specifications of the final product, with jurisdiction and classification provided on request. Call us at 210.566.1857 and we will work through it with you.
    Next step

    Put trace detection in every officer's hand

    Tell us where you screen, from entry control checkpoints and venues to vehicle and bag checks, and we will follow up with details on the Fido X2.

    CONTACT US