-
Simultaneously control up to 4 gas monitoring channels
-
OLED display of all 4 channels
-
LEL / O2 / CO2 / toxic direct connect sensors
-
Accepts any 4-20 mA transmitter, 2 or 3 wire
-
Up to 3 programmable alarm levels per channel
-
Up to 3 configurable alarm relays per channel
-
4-20 mA analog & Modbus digital output standard
-
115 / 220 VAC or 24 VDC operation
-
Audible alarm with silence feature
-
RFI / EMI Resistant
-
Alarm reset switch
-
Built in trouble alarm with relay
-
Weather and corrosion resistant NEMA 4X enclosure
-
Min-Max feature retains high & low peak readings
-
Trickle charging battery backup option available
-
Easy to use menus on OLED display
-
Form-C relay contacts built into unit
Beacon 410A
$0.00
The RKI Instruments Beacon 410A is a 4-channel gas detection controller for simultaneous monitoring of LEL, O2, CO2, and toxic gases with configurable alarms and relay outputs.
In stock
The Beacon 410A is a highly configurable, microprocessor-based, flexible 4-channel gas monitoring controller that simultaneously displays gas type, readings, and status for four channels. It monitors any combination of direct connect sensors (LEL, O2, CO2, and toxic) and 4-20mA transmitters. Features include up to 3 configurable alarm points per channel, 2 dedicated relays per channel plus common relays, 4-20mA analog and Modbus digital output, audible alarm with silence feature, NEMA 4X enclosure, and operation on 115/220 VAC or 24 VDC. Optional strobe and battery backup available.
Description
Beacon 410A
The Beacon 410A is a highly configurable, microprocessor-based, flexible 4-channel gas monitoring controller that simultaneously displays gas type, readings, and status for four channels. It monitors any combination of direct connect sensors (LEL, O2, CO2, and toxic) and 4-20mA transmitters. Features include up to 3 configurable alarm points per channel, 2 dedicated relays per channel plus common relays, 4-20mA analog and Modbus digital output, audible alarm with silence feature, NEMA 4X enclosure, and operation on 115/220 VAC or 24 VDC. Optional strobe and battery backup available.
Features
Specifications
- Dimensions
- Height: 12.5″ Width 11″ Depth 6.4″
- Enclosure
- NEMA 4X non-metallic for indoor and outdoor locations
- Conduit Connection
- 3/4″ NPT conduit hubs, 4 provided, for sensor, power, & relay wiring
- Wiring Termination
- Screw type terminal block, 14 gauge max
- Power
- 115 VAC & 220 VAC, or 24 VDC nominal, battery backup option available
- Controls
- Display PCB Control Switches: UP/YES push button switch, DOWN/NO push button switch, ESCAPE push button switch, ENTER push button switch, External reset switch, On/Off toggle switch
- Operating Temp
- -40°F to 122°F (-40°C to 50°C)
- Storage Temp
- -40°F to 158°F (-40°C to 70°C)
- Relative Humidity
- 0 – 80% RH (non-condensing)
- Enclosure Rating
- NEMA-4X enclosure, chemical and weather resistant
- Direct Wired Sensors
- LEL, Oxygen, Carbon Monoxide, Hydrogen Sulfide, and Carbon Dioxide. Remote amp not required for less than 500 feet
- 4-20 mA Sensors
- Accepts any 4-20 mA transmitter (24 VDC, 2 or 3 wire). Wiring distances up to 8,000 feet
- Sampling Methods
- Diffusion and sample draw heads available
- Relays
- Two flexible, programmable Form-C (C, NO, NC) relays per channel, plus five common relays (Fail, Alarm-1, Alarm-2, Alarm-3, Alarm-Any). 10A contact rating.
- 4-20 mA Output
- Signal output, 4-20 mA (maximum load impedance 500 ohms), per channel
- RS-485
- Modbus format RS-485 serial output of all channel data, including gas reading and alarm status
- Display
- Four line OLED display
- Audible
- Built-in audible alarm, 94 dB, mounted on enclosure. Coded output: pulsing = gas alarm, steady = fail
- Visual
- Alarm LEDs (Alarm 1 yellow, Alarm 2 orange, Alarm 3 red, Fail yellow), Green Pilot LED for AC power, Optional 24 VDC NEMA 4X strobe on top of case
- Warranty
- One year materials and workmanship
