No products in the cart.

  • Mirion Technologies · Radiation detection

    Mirion AccuRad PRD

    Personal radiation detector · Hp(10) and H*(10) versions

    A discreet and robust gamma radiation detector, designed for law enforcement and first responders to interdict nuclear and radioactive materials. It clips to the belt for the whole shift, alarms on a genuine threat, points you toward the source, and keeps measuring dose and dose rate when an event turns radiological.

    Mirion AccuRad PRD front view, screen in Search mode reading 12.0 microRem/h above a directional radar display, red alarm LED below the buttons
    7 ozWeight (200 g), including clip
    >900 hContinuous operation on two AA batteries
    IP67Dust and 1 m water immersion
    2 sAlarms at 50 µrem/h (0.5 µSv/h) within two seconds
    Wear it all shift

    Built to ride on the belt, not in the truck

    Mirion states the AccuRad PRD was developed in close collaboration with state and federal law enforcement and first responders, to integrate into their routines. That shows in how it is carried: light, clipped on, readable without unclipping, and fed by ordinary AA cells.

    AccuRad PRD clipped to a duty belt at the hip, worn by a responder in a black shirt and grey trousers
    Belt-worn, hands free
    Firefighter in turnout gear holding a helmet, with the AccuRad PRD clipped to the gear belt beside the breathing-apparatus mask
    On turnout gear
    Top edge of the AccuRad PRD: the small top display reads 6.7 micro Rem/h with the red alarm LED above it
    Top display: a glance down reads the dose rate without unclipping
    1. 01Clip on

      Seven ounces, with the clip

      The unit measures 4.25 x 2.4 x 1.4 in. (108 x 61 x 36mm) without clip and weighs 7 oz (200 g) including it. A tough, built-in belt clip fixes it securely to a belt or pocket, and the clip itself is a replaceable fiber-reinforced part.

      Innovative heavy-duty bi-material constructionReplaceable fiber-reinforced clip
    2. 02Glance

      Two screens: one for your hand, one for your belt

      A large front display for handheld work, plus a top display that enables hands-free visual readout and alarm assessment. Users can glance at a reading without removing the AccuRad PRD from their belt or pocket.

      Reverse contrast option10 display languages
    3. 03Work

      Five big buttons, one hand, thick gloves

      Comfortable for one-handed operation and usable with thick gloves and reduced visibility (gas mask). Mirion describes the controls as intuitive to use even without training, and device data is saved automatically with no operator action required.

    4. 04Outlast

      Two AA batteries for > 900 hours of continuous operation

      A tool-less battery cover and commercially available cells: AA (LR6) 1.5 V alkaline, lithium 1.5 V (non-rechargeable) or NiMH 1.2 V (rechargeable). The USB-C port recharges NiMH cells; Mirion refers users to the operating manual when using different battery types.

    5. 05Endure

      Dust, immersion, drops and cold

      Resistant to dust, sand and moisture, with shock resistance from the PRD body.

      IP67 · dust and 1 m (3 ft 3 in.) water immersionDrop: 1.5 m (4 ft 11 in.) on concrete-13 °F to 140 °F (-25 °C to 60 °C)

    Not for explosive atmospheres. The AccuRad PRD is not certified for explosive atmospheres. Plan its use around your department's hazardous-location procedures.

    Alarm behaviour

    Quiet all day. Loud when it counts.

    An always-on detector is only useful if people trust its alarms. The AccuRad PRD uses Variable Background Suppression (VBS) so it can work in diverse background environments and trigger an alarm only for genuine threats or hazards.

    50 µrem/hAlarms at 50 µrem/h (0.5 µSv/h) within two seconds
    <2 / 8 hLess than two alarms per 8 hours in stable background (typically zero alarm per 24 hours)
    85 dB(A)Audible sound: 85 dB(A) at 30 cm (11.8 in.)
    How it tells you

    Four ways to get your attention

    The PRD triggers selectable audible, visual and/or vibration alarms, with one-touch alarm acknowledgment and automatic data recording.

    • Vibration

      Silent, on the body.

    • Visual LED

      Bright LED alarm indicators.

    • Audible

      85 dB(A) at 30 cm (11.8 in.).

    • Display

      Display messages.

    Gloved hand holding the AccuRad PRD showing HIGH ALARM 1.023 milliRem/h with the red LED lit
    Discreet mode

    For covert work. Discreet mode silences alarms for stealth applications: by default, the audible and visual alarms (LEDs) are deactivated while the vibration and display messages stay active. USB-C headphone connectivity adds a further level of stealth operation.

    0–9 display mode

    Low, high, danger

    Besides dose rate or count rate, the PRD can show a simple unit-less 0–9 indicator. The default alert levels:

    Display valueEquivalent average dose rate (mR/h)
    Danger
    1. 93.213
    2. 81.664
    3. 70.863
    High
    1. 60.449
    2. 50.235
    3. 40.125
    Low
    1. 30.068
    2. 20.038
    3. 10.023
    —
    1. 00.009

    Default values; bar lengths show order, not scale. Device settings can be changed through the AccuRad app and the AccuRad Management center. Alarm actions on the device are suggestions and should not replace operator procedures and CONOPS.

    Smartphone pairing

    Tap to pair. Share the picture.

    The AccuRad PRD pairs with a smartphone through the AccuRad app, giving real-time remote access to measurements and alarm history, plus data logging, batch processing, messaging and reachback to common operational data platforms.

    AccuRad PRD, the detector that pairs with the smartphone app
    On the belt

    AccuRad PRD

    • Bluetooth Low Energy
    • NFC pairing to smartphone
    Android · iOS

    AccuRad app

    • Remote display and alarms
    • Settings, history and logs
    • Batch configuration and updates
    • Learning section with how-to videos and documentation
    Email · SMSMessaging straight from the app.
    RadResponderReachback/streaming target.
    SpirVIEW Mobile softwareSupervisory monitoring alongside other SPIR family instruments.
    Plain-clothes and event work

    Keep it out of sight

    For event security, Mirion suggests personnel in plain clothes consider carrying the PRD covertly in a pocket or backpack and getting alarms and dose rates through the AccuRad PRD smartphone application.

    The app also bridges responders on the ground and command-center software with real-time geospatial and radiological data relay. The PRD is compatible with RadResponder, Sigma and SpirVIEW Mobile software.

    Fleet setup at the station

    AccuRad Management center

    The desktop software handles device configuration, maintenance, data retrieval and batch configuration of a fleet of devices. Communication needs no configuration: plug the AccuRad into the computer with a USB-C cable. Mirion states that hundreds of devices can be customized within minutes.

    Two versions

    Hp(10) or H*(10): pick the dose quantity

    The AccuRad PRD comes in two versions that differ in the dose quantity they report and the standards they are rated to. Both work as a personal radiation detector and a body-worn dosimeter; the H*(10) version adds ambient dose equivalent for survey work.

    Hp(10)
    AccuRad PRD Hp(10) version · Personal dose equivalent rate
    • Personal radiation detector

      Early warnings of hazardous radiation levels; search capabilities guide responders to locate and address radiation sources.

    • Dosimeter functionality

      When body-worn, continuously provides dose rates and dose measurements and can trigger an alarm when exceeding a safety threshold.

    Standards
    ANSI N42.32-2016, ANSI N42.20-2003, ANSI N42.17A
    Mirion ref.
    ACCURAD (Americas) or NOM005331 (other countries)
    H*(10)
    AccuRad PRD H*(10) version · Personal & ambient dose equivalent rates
    • Personal radiation detector

      The same early warnings and search capabilities as the Hp(10) version.

    • Dosimeter functionality

      When body-worn, continuously provides dose rates and dose measurements and can trigger an alarm when exceeding a safety threshold.

    • Low dose rate survey meter H*(10)

      Helps responders assess safe exposure limits and establish safe zones in public areas.

    • Micro rem meter H*(10)

      Near nuclear facilities, acts as a tissue-equivalent survey meter measuring up to 10 MeV. High-energy photon measurement compliant with IEC 60846-1.

    Standards
    IEC 62401:2017, IEC 60846-1:2009, IEC 60846-2:2015
    Mirion ref.
    NOM008516

    Tell us which version you need

    Our listing covers the AccuRad PRD; name Hp(10) or H*(10) when you request a quote. On a unit in hand, check the startup screen or the calibration certificate: the H*(10) has an IEC 60846-1 compliant label in the battery compartment.

    Request a quote
    Specifications

    Technical specifications

    Detection
    Detectors
    • CsI(Tl) scintillation detector with temperature compensated SiPM for interdiction missions and public safety
    • Silicon diode for integrated dose and high and low dose rate measurements to ensure proper health and safety in emergency response situations
    CsI(Tl) sensitive volume10 mm (0.4 in.) diameter by 35 mm (1.4 in.) long
    Radiation typePhotons (Gamma, X)
    Energy rangeDetects all radionuclides of concern, from 25 keV to 10 MeV; Dose rate response +/-25% from 55 keV to 10 MeV
    Count rate (Search mode)0 cps to 160 000 cps
    UnitsSv, rem, unit-less (0-9), cps (search mode)
    StabilizationWarm-up time: 35 seconds · No source required
    IEC rated dose and dose rate range (for Cs-137)
    Low dose rate range (CsI)1 µrem/h to 100 mrem/h (0.01 µSv/h to 1 mSv/h). Minimum displayed 0.1 µrem/h (0.001 µSv/h)
    High dose rate range (Diode)100 mrem/h to 1000 rem/h (1 mSv/h to 10 Sv/h)
    Dose range10 µrem to 1000 rem. Minimum displayed 1 µrem
    Dose rate linearity+/-10 % from 10 µrem/h to 1000 rem/h (0.1 µSv/h to 10 Sv/h)
    Dose linearity+/-10% from 10 µrem to 1000 rem (0.1 µSv to 10 Sv)
    Alarms
    Alarm responseAlarms at 50 µrem/h (0.5 µSv/h) within two seconds
    VBSAuthenticates true alarms in variable backgrounds
    False alarm rateLess than two alarms per 8 hours in stable background (typically zero alarm per 24 hours)
    AlarmingVibration · Visual LED · Audible sound: 85 dB(A) at 30 cm (11.8 in.)
    Discreet modeAudible and visual (LED) alarms deactivated by default; vibration and display messages active. USB-C headphone connectivity.
    Display and controls
    Modes of operationDose or count rate · Search with trend or radar · 0-9 display indicator
    DisplayTop display enables hands-free visual readout and alarm assessment · Reverse contrast option
    LanguagesArabic, Chinese, English, French, German, Italian, Japanese, Korean, Polish and Spanish
    Buttons and navigationIntuitive to use even without training · Comfortable for one-handed operation · Usable with thick gloves and reduced visibility (gas mask)
    DataDevice data automatically saved with no operator action required
    Physical
    Weight7 oz (200 g), including clip
    Size4.25 x 2.4 x 1.4 in. (108 x 61 x 36mm) without clip
    ConstructionInnovative heavy-duty bi-material construction · Replaceable fiber-reinforced clip
    Environment
    Protection ratingIP67 (dust and 1 m (3 ft 3 in.) water immersion)
    Temperature-13 °F to 140 °F (-25 °C to 60 °C)
    Drop1.5 m (4 ft 11 in.) on concrete
    Shock and vibrationTemperature shocks and relative humidity according to ANSI/IEC standards · Vibration, impact according to ANSI/IEC standards
    Explosive atmospheresNot certified for explosive atmospheres
    Power
    BatteryTwo AA batteries for > 900 hours of continuous operation; Tool-less battery cover
    Battery types
    • AA (LR6) 1.5 V alkaline
    • Lithium 1.5 V batteries (non-rechargeable)
    • NiMH 1.2 V batteries (rechargeable)
    Power supplyUSB-C (recharges NiMH)
    Device
    WirelessBluetooth® Low Energy with Near Field Communications (NFC) pairing to smartphone
    WiredUSB type C for earphones, maintenance and charging
    Software
    Smartphone appAndroid, iOS
    App-enabled featuresRemote display, settings, access to history and logs, batch configuration and updates
    Reachback / streamingEmail, SMS, SpirVIEW Mobile software, RadResponder
    Compatible platformsRadResponder, Sigma, SpirVIEW Mobile software
    LearningLearning section with how-to videos and documentation
    DesktopAccuRad Management center: device configuration, maintenance, data retrieval and batch configuration over USB-C
    Radioprotection standards by version
    AccuRad PRD Hp(10)ANSI N42.32-2016, ANSI N42.20-2003, ANSI N42.17A
    AccuRad PRD H*(10)IEC 62401:2017, IEC 60846-1:2009, IEC 60846-2:2015
    Identifying the H*(10)Startup screen or calibration certificate; IEC 60846-1 compliant label in the battery compartment
    Supplied
    StandardAccuRad PRD, AA alkaline batteries, quick guide, spare clip
    CalibrationCalibration certificate provided with purchase of the AccuRad PRD
    FAQ

    Common questions

    What is the difference between the Hp(10) and H*(10) versions?
    The Hp(10) version reports personal dose equivalent rate and is rated to ANSI N42.32-2016, ANSI N42.20-2003 and ANSI N42.17A. The H*(10) version reports personal and ambient dose equivalent rates and is rated to IEC 62401:2017, IEC 60846-1:2009 and IEC 60846-2:2015, so it can also serve as a low dose rate survey meter and a micro rem meter near nuclear facilities. Tell us which one you need when you request a quote.
    How do I tell which version a unit is?
    Check the startup screen or the calibration certificate. The H*(10) has an IEC 60846-1 compliant label in the battery compartment.
    Will it alarm every time the background changes?
    It is designed not to. Variable Background Suppression (VBS) authenticates true alarms in variable backgrounds, and it gives less than two alarms per 8 hours in stable background (typically zero alarm per 24 hours). The alarm triggers at 50 µrem/h (0.5 µSv/h) within two seconds.
    Can it be worn covertly?
    Yes. Discreet mode silences alarms for stealth applications; by default the audible and visual (LED) alarms are off while vibration and display messages stay active. USB-C headphones can be connected, and the smartphone app can show alarms and dose rates while the PRD sits in a pocket or backpack.
    What batteries does it take, and how long do they last?
    Two AA batteries for more than 900 hours of continuous operation (alkaline). It also supports lithium 1.5 V and rechargeable NiMH 1.2 V cells; NiMH cells recharge over USB-C. Mirion refers users to the operating manual when using different battery types.
    Is it waterproof? Can it be used in explosive atmospheres?
    The protection rating is IP67 (dust and 1 m (3 ft 3 in.) water immersion), and it is drop tested at 1.5 m (4 ft 11 in.) on concrete. It is not certified for explosive atmospheres.
    What radiation does it detect?
    Photons (gamma, X), with an energy range from 25 keV to 10 MeV.
    How should it be worn?
    The reference direction of the measurement is orthogonal to the front display, to guarantee an optimal measurement of both detectors when the AccuRad PRD is carried. The top display lets you read it without unclipping.
    Does the radar need calibration?
    It is calibrated in the factory before delivery and ready to operate. It can be recalibrated with the built-in radar calibration module under Settings > Service > Radar Calib.
    What comes in the box?
    The standard supply is the AccuRad PRD, AA alkaline batteries, a quick guide and a spare clip. A calibration certificate is provided with purchase.
    Next step

    Put radiation detection on the belt

    Request a quote on the Mirion AccuRad PRD. Let us know whether you need the Hp(10) or H*(10) version and how many responders will carry one.

    CONTACT US