-
LED Display (With Antiglare Cover)
-
Full Text Display Method
-
Non-intrusive Interface
-
Auto Zero/Auto Span
-
Pre-emptive Fault Diagnostics
-
Electropolished 316SS Construction
-
100% Epoxy Encapsulated Circuitry
-
Bulletproof I/O Protection
-
Water-Proof, Corrosion-Proof, Vibration-Proof
-
Modular Design
-
Plug and Play Components
-
Quick Thread Release (For Sensor Replacement)
-
Integral Calibration Port
-
Poison-resistant detector
-
Wireless option with SmartWireless product line
-
Remote Alarm Module (RAM) integration
-
HART integration option
-
Infinite shelf life
FP-700 combustible catalytic-bead element
$0.00
The Teledyne Detcon FP-700 is a replacement combustible gas sensor with poison-resistant catalytic bead technology for hazardous location monitoring.
In stock
Model FP-700 is a non-intrusive ‘Smart’ sensor designed to detect and monitor combustible gases in air over the range of 0-100% LEL using matched-pair catalytic bead sensor technology. Features plug-in field replaceable detector with poison-resistant design, electropolished 316 stainless steel housing, fully encapsulated electronics, and dual-layer surge protection. Includes 4-digit LED display with full-text menu prompts, auto zero/auto span calibration, and pre-emptive fault diagnostics. Equipped with standard 4-20mA analog and Modbus RS-485 outputs. Optional wireless, HART, and Remote Alarm Module integration available. Approved for Class I Division 1 and ATEX Zone 1 hazardous locations. 2-year warranty.
Description
FP-700 combustible catalytic-bead element
Model FP-700 is a non-intrusive ‘Smart’ sensor designed to detect and monitor combustible gases in air over the range of 0-100% LEL using matched-pair catalytic bead sensor technology. Features plug-in field replaceable detector with poison-resistant design, electropolished 316 stainless steel housing, fully encapsulated electronics, and dual-layer surge protection. Includes 4-digit LED display with full-text menu prompts, auto zero/auto span calibration, and pre-emptive fault diagnostics. Equipped with standard 4-20mA analog and Modbus RS-485 outputs. Optional wireless, HART, and Remote Alarm Module integration available. Approved for Class I Division 1 and ATEX Zone 1 hazardous locations. 2-year warranty.
Features
Specifications
- Sensor Type
- Continuous diffusion/adsorption Matched-pair catalytic bead detector Plug-in field replaceable
- Sensor Life
- 3 to 5 years typical
- Measurement Range
- 0-100% LEL (lower explosive limit)
- Accuracy/Repeatability
- ±3% 0-50% LEL; ±5% 50-100% LEL
- Response/Clearing Time
- T50 <10 seconds; T90 <30 seconds
- Zero Drift
- <5% per year
- Outputs
- Linear 4-20 mA DC; RS-485 MODBUS-RTU
- Explosion proof
- cCSAus Class I, Division 1, Groups B, C, D (Tamb = -40°C to +75°C); ATEX II 2 G Ex d IIB + H2 T4 Gb (Tamb = -40°C to +70°C)
- Ingress Protection
- NEMA 4X, IP66
- Safety Approvals
- cCSus Performance to ANSI/ISA 60079-29-1 (12.13.01)-2013 and CSA 22.2 #152; ATEX CE Marking; SIL2 Certified to IEC 61508
- Warranty
- Plug-in detector – 2 years; Transmitter – 2 Years
- Operating Temperature Range
- -40°F to +167°F; -40°C to +75°C
- Storage Temperature Range
- -40°F to +167°F; -40°C to +75°C
- Operating Humidity Range
- 0-99% RH non-condensing
- Power Input
- 11-30 VDC
- Power Consumption
- Normal operation = 68mA (<1.7 watt); Maximum = 85mA (2 watts)
- Inrush Current
- 1.0A @ 24V
- RFI/EMI Protection
- Complies with EN50270
- Analog Output
- Linear 4-20mA DC (1,000 ohms max loop load @ 24VDC); 0mA All Fault Diagnostics; 2mA In-Calibration; 4-20mA 0-100% full-scale; 22mA Over-range condition
- Serial RS-485 Output
- RS-485 Modbus RTU; Baud Rate 9600 BPS (9600,N,8,1 Half Duplex)
- Status Indicators
- 4-digit LED display with gas concentration; Full-script menu prompts for AutoSpan, Set-up Options, and Fault Reporting
- Faults Monitored
- Operating Temperature, Loop, Input Voltage, Bridge Voltage, Zero, Sensor, Processor, Memory, Calibration
- Dimensions
- 7″H x 2.2″ Dia.; 178mmH x 65mm Dia. (sensor assembly only); 11″H x 6.1″W x 3.75″D; 280mmH x 155mmW x 96mmD (with junction box); Mounting holes (J-box) 5.5″; 140mm center to center
- Weight
- 2 lbs; 0.907kg (sensor only); 6 lbs; 2.72kg (w/aluminum j-box); 9 lbs; 4.08kg (w/stainless steel j-box)
You May Also Like
Related products
