Edwards & Cromwell Football / Golf Ball Plug – Water-Activated Foam Leak Plug
Water-activated polyurethane foam plug that temporarily stops leaks in pipes, drums, tankers, railcars and boats. Dip, insert and it sets rock hard in minutes. Football and 1.5 in. golf ball sizes.
- Buyboard contract 798-26
- Woman-owned · HUB-certified
- Tax-exempt & POs accepted
Overview
The Edwards & Cromwell Football and Golf Ball Plugs are polyurethane-impregnated, water-activated foam plugs for temporarily stopping a leak in anything from a pipe or drum to a tanker, railcar or boat hull. The plug starts out pliable so it can be worked into the void, then quickly expands and sets rock hard to fill it. It can even be applied below the water line.
Each plug is ready to use with no mixing: dip it in water for about five seconds, twist it into the hole and press it against the surface to form a mushroom seal. The football size handles larger punctures such as saddle-tank damage at a truck crash; the 1.5-inch golf ball size suits smaller holes. Each kit includes step-by-step instructions, protective gloves and the plug. Made in USA.
- Ready to use: no mixing, no mess
- Water-activated: submerge for about 5 seconds and apply
- Sets rock hard in about 2 minutes at 75 °F
- Can be applied below the water line
- For pipes, drums, tankers, railcars and marine thru-hull damage
- Kit includes step-by-step instructions, protective gloves and the plug
- Made in USA
Specifications
| Physical | |
| Size | Football: 3.25 in. OD x 6 in. Golf Ball: 1.5 in. round |
| Color | Yellow foam, white urethane |
| Other | |
| Specification | Value |
| Part numbers | SPF (Football Plug), SPG (Golf Ball Plug) |
| Resin type | Pre-impregnated polyurethane |
| Cure time | 2 min at 75 °F (24 °C) |
| Application temperature | 32 to 160 °F (0 to 71 °C) |
| Storage | Cool, shaded, dry area, ideally around 72 °F (23 °C); keep between 40 °F and 110 °F (5 °C to 44 °C). Keep the foil pouch sealed until use. |
| Chemical resistance | Excellent against diesel, gasoline, JP-4/JP-5, kerosene, motor oil, brine, water, hexane, toluene, xylene and dilute acids/bases. Poor against acetone, MEK and alcohols; not for concentrated sulfuric or nitric acid. |
