Teledyne FLIR / Explosives trace detection

FLIR Fido X4

Name: FLIR Fido X4 – Handheld Explosives Trace Detector with TrueTrace Technology
Brand: FLIR
SKU: FN-40-A

Premium Handheld Explosives Trace Detector

A handheld explosives trace detector (ETD) built around a swipe: collect a sample, insert it, read a color-coded alarm. Teledyne FLIR describes the Fido X4 as a detector that “delivers unmatched sensitivity for a broad range of explosives, so you can easily detect threats at levels others cannot,” using its TrueTrace® five-channel sensor array.

Request a quote

See the workflow

10 - 25 sTime to alarm

3.2 lbsLight weight

16 hrContinuous operation, up to (two hot-swappable batteries)

IP54MIL-STD-810G compliant

Teledyne FLIR Fido X4 handheld explosives trace detector, three-quarter front view with the screen showing the Insert Sample prompt

01Insert sample prompt 02Hot-swappable battery

How a screen runs

Swipe. Insert. Alarm. Clear.

Every Fido X4 screen follows the same loop. The operator collects trace residue on a swipe (or presents a bottled liquid’s vapour), the instrument analyses it, alarms with a strength indicator, then clears down for the next sample.

Collect

Two sample paths, chosen by what you are screening.

Particulate“Swipes for particle collection and surface sampling”, for high-throughput checkpoint or randomised screening.

Vapour“Direct vapour for bottled liquids”, for handheld bottle and container liquid screening.

Insert & analyse

On-screen prompts walk the operator through each step. TrueTrace® five-channel fluorescence technology runs the analysis, with no radioactive source.

5sensor channels

Alarm

Clear, color-coded alarms with strength indicators, delivered three ways:

Visible
Audible
Haptic (vibration)

10 - 25seconds, time to alarm

Clear down

The instrument clears down and is ready for the next swipe.

< 30seconds, clear-down time

Close-up of the Fido X4 color display showing the Insert Sample prompt — Display · on-screen “Insert sample” prompt

Readiness

From power-on to the next swipe

Three published timings cover the cycle, from waking the instrument to being ready for the next swipe:

Startup3 minutes from cold; <10 seconds from sleep

Time to alarm10 - 25 seconds

Clear-downLess than 30 seconds

Bar segments are not to scale.

Detection technology

TrueTrace®: five channels, no radioactive source

The Fido X4 detects by fluorescence across a five-channel sensor array rather than with a radioactive source. Here is how Teledyne FLIR describes it.

Illustration: five-channel fluorescence array to color-coded alarm with strength indicator.

“…a new five-channel sensor array that delivers expanded threat coverage, enhanced sensitivity, and specific threat identification”

Teledyne FLIR

TechnologyTrueTrace®; five-channel fluorescence technology; no radioactive source.
Sampling phaseTrace particulate and vapour.
SensitivityTeledyne FLIR states the X4 detects a wide range of explosives “at nanogram to sub-nanogram levels”.
ConditionsIdentification “in a wide range of environmental conditions”.

Explosive classes covered

The seven classes Teledyne FLIR lists for the Fido X4. Ask us if you need more for a specific requirement.

01Nitroaromatics
02Nitramines
03Nitrate-esters
04Nitrosamines
05Plastic Explosives
06Smokeless Powders
07Peroxides

Operator & data

Short to learn, easy to report

Teledyne FLIR says the interface “dramatically reduces training burden and increases end-user adoption and retention.” Results are logged on the device and leave it over USB-C, Wi-Fi or Bluetooth.

Learn on the device

On-device video tutorials and on-screen user prompts give step-by-step instruction, so operators can learn basic operation and start screening quickly.

Read the result

Color-coded alarms with strength indicators, plus visible, audible and haptic alerts.

Vivid, sunlight-readable colour display (32k colors).

Connect

Power, firmware updates and data transfer over Bluetooth®, Wi-Fi and USB-C.

USB-C (Drive and Link modes), toggleable Wi-Fi, and Bluetooth.

Log everything

Screening activity is logged on the instrument.

3,500 hours of continuous data logging.

Report on the spot

Analysis and reporting are kept simple so critical data can be shared quickly.

On-device report generation; export to mass storage.

Two user levels

Two defined user levels on the device. Language translation is available worldwide.

Operator, Administrator.

Sheriff's deputy holding a sample swipe to a Fido X4 while screening a traveller carrying a red backpack — Checkpoint screening: a deputy holding a sample swipe to the Fido X4

In the field

Checkpoint, patrol, bottle

“From high-volume checkpoint and randomised screenings to foot patrol and standoff operations, Fido X4 is ready to go when and where you need it.”Teledyne FLIR

Particulate mode

Checkpoint & randomised screening

Swipe-based particulate sampling for high-throughput screening, with a clear-down of less than 30 seconds between samples.

On foot

Patrol & standoff operations

Light at 3.2 lbs, with up to 16 hours of mission time from two hot-swappable batteries.

Vapour mode

Bottles & containers

Vapour sampling mode for handheld bottle and container liquid screening, using direct vapour for bottled liquids.

3.2 lbs

About 1.5 kg, ergonomic

16 hr

Up to; two 8-hour hot-swappable batteries included

IP54

Dust ingress and water resistance

810G

MIL-STD-810G: shock, vibration, temperature, humidity

1 m

One meter drop tested

Specifications

Fido X4 specifications

Detection
Technology	TrueTrace®; five-channel fluorescence technology; no radioactive source.
Sample introduction	Swipes for particle collection and surface sampling; direct vapour for bottled liquids.
Sampling phase	Trace particulate and vapour.
Explosive classes	Nitroaromatics Nitramines Nitrate-esters Nitrosamines Plastic Explosives Smokeless Powders Peroxides
Timing
Time to alarm	10 - 25 seconds.
Clear-down time	Less than 30 seconds.
Startup time	3 minutes from cold; <10 seconds from sleep.

Interface
Display and alerts	Visible, audible, and haptic (vibration) alerts; vivid, sunlight-readable colour display (32k colors).
Localisation	Language translation available worldwide.
User levels	Operator, Administrator.
Data
Communication	USB-C (Drive and Link modes), toggleable Wi-Fi, and Bluetooth.
Data storage	3,500 hours of continuous data logging.
Data management	On-device report generation; export to mass storage.

Power
Battery	Up to 16-hour mission time; two rechargeable and hot-swappable Li-ion batteries, each lasting up to 8 hours.
Input voltage	100-240 VAC (wall adapter supplied).
Physical & environmental
Dimensions (L x W x H)	14.5 x 4.5 x 2.8 in (37.0 x 11.5 x 7.0 cm) – with battery
Weight	3.2 lbs (1.5 kg)
Enclosure and protection	IP54-rated, moulded magnesium and polymer composite casing with anti-corrosive coating.
Ruggedness	MIL-STD-810G compliant for shock, vibration, temperature, and humidity; one meter drop tested.
Operating temperature	32 to 104 °F (0 to 50 °C)
Storage temperature	-10 to 50 °C (14 to 122 °F)
Operating humidity	5% to 95% non-condensing

Export notice: Teledyne FLIR states this product may be subject to ITAR or EAR export regulations depending upon specifications for the final product; jurisdiction and classification will be provided upon request.

Resources

Datasheet & support

Download the official Teledyne FLIR Fido X4 datasheet, or ask us about pricing and availability.

Datasheet

Fido X4 datasheet

The official Teledyne FLIR Defense datasheet for your evaluation or procurement file.

PDF · Teledyne FLIR Service

FarrWest Repair Depot

OEM-certified service and support on every product we deliver. When a repair or calibration falls outside our in-house scope, we coordinate directly with the manufacturer and manage the logistics end to end.

Learn more Talk to us

210.566.1857

Questions on sampling modes, deployment or export paperwork? Call, or email sales@farrwest.com.

Call now

FAQ

Common questions

Does the Fido X4 use a radioactive source?

No. The Fido X4 uses TrueTrace® five-channel fluorescence technology, with no radioactive source.

How fast does it alarm, and how soon can I run the next sample?

Time to alarm is 10 - 25 seconds and clear-down time is less than 30 seconds. Startup is 3 minutes from cold and <10 seconds from sleep.

Can it screen liquids?

Yes. Alongside particulate swipe sampling, the X4 has a vapour sampling mode for handheld bottle and container liquid screening (“direct vapour for bottled liquids”).

Which explosives does it detect?

Teledyne FLIR lists Nitroaromatics, Nitramines, Nitrate-esters, Nitrosamines, Plastic Explosives, Smokeless Powders, and Peroxides, and states detection “at nanogram to sub-nanogram levels”.

How long does it run on batteries?

Up to 16 hours of mission time with two rechargeable, hot-swappable Li-ion batteries, each lasting up to 8 hours. Both batteries are included, and a 100-240 VAC wall adapter is supplied.

How do I get results off the instrument?

The X4 generates reports on the device and exports to mass storage. Connectivity is USB-C (Drive and Link modes), toggleable Wi-Fi, and Bluetooth, which Teledyne FLIR also lists for power and firmware updates.

How does the X4 relate to the Fido X3?

Teledyne FLIR’s explosives line-up lists the Fido X3 as “Pending Discontinuation, Recommended Replacement: FLIR Fido X4”.

Is the Fido X4 export controlled?

Teledyne FLIR notes the product may be subject to ITAR or EAR export regulations depending upon specifications for the final product, with jurisdiction and classification provided upon request. Request a quote and we will work through it with you.

Why FarrWest

Buying from FarrWest

Cooperative contracts

Next step

Put a Fido X4 on your screening line

Tell us where you screen (checkpoint, patrol or bottled liquids) and we will come back with pricing and availability.

Request a quote

Call 210.566.1857

Or email sales@farrwest.com

FLIR Fido X4