No products in the cart.

  • 908 Devices · FTIR + Raman identification

    908 Devices VipIR

    Smart Spectral Processing combined with FTIR and Raman analysis for a single, confident result

    One handheld, two analytical technologies and the algorithm that ties them together. VipIR collects two separate spectra from the exact same sample, without re-positioning it or taking an additional sample, and Smart Spectral Processing uses the results from one technique to refine, challenge, or confirm the interpretation of the other. You read one identification, not two.

    3-in-1FTIR, Raman and SSP in one device
    39,000+Chemical spectra in the library
    9.5 lbs4.3 kgs, handheld
    IP 67Plus MIL-STD-810G
    908 Devices VipIR handheld chemical identifier, three-quarter view with spectrum on the touchscreen and the flexible Raman probe attached
    Shown with the flexible Raman probe
    SmartID workflow

    Same sample, second opinion built in

    VipIR runs FTIR and Raman on one sample and lets Smart Spectral Processing (SSP), a proprietary algorithm, check one against the other before it reports. 908 Devices says this interaction enhances the accuracy and reliability of chemical identification from a single sample.

    Line illustration of the VipIR sampling interface with the sample clamp raised
    01 Load

    Place it once

    Solids or liquids go onto the single sampling interface. Nothing is moved between techniques and no additional sample is taken.

    Stylised illustration of two spectra shown separately and then overlaid
    02 Measure

    Two spectra, cross-checked

    VipIR collects an FTIR and a Raman spectrum from the exact same sample. SSP actively integrates the two data sets, using the results from one to refine, challenge, or confirm the interpretation of the other.

    Illustration of a SmartID result list with star ratings and check marks
    03 Decide

    One confident result

    SmartID uses SSP to provide a singular, confidence-based result. Check marks indicate the result was confirmed by both Raman and FTIR.

    The result
    “The result is a single, high-confidence identification of unknown solids, or liquids, including toxic industrial chemicals, narcotics, explosives, and everyday chemicals.”
    908 Devices
    Three techniques, one device

    FTIR, Raman and the algorithm between them

    908 Devices calls VipIR a 3-in-1 device with FTIR, Raman, and SSP, and is clear that it is more than two instruments in one case: it “amplifies their capabilities” for unknown substance identification. Here is what each part brings.

    Technique 01

    FTIR

    The first of the two analytical technologies in VipIR's singular workflow.

    Range
    4000 – 650 cm-1
    Resolution
    4 cm-1 res
    Technique 02

    Raman

    The second technology, collected from the same sample. Raman sampling also includes the flexible, integrated Raman probe for non-invasive identification through containers, and an integrated vial holder for standard vials.

    Range
    250 – 2875 cm-1
    Resolution
    7 – 10.5 cm-1 res
    Laser
    785 nm; up to 450 mW
    Technique 03

    Smart Spectral Processing

    A proprietary algorithm that actively integrates Raman and FTIR spectral data. It uses the results from one to refine, challenge, or confirm the interpretation of the other.

    Output
    SmartID: a singular, confidence-based result
    Confirmed
    Check mark when both Raman and FTIR agree
    Simplified

    Let SmartID decide

    A simplified workflow eliminates the guesswork in unknown chemical identification: FTIR, Raman, and SSP analysis to refine and confirm results.

    Flexible

    Choose the technology yourself

    VipIR was built with flexibility in mind. Experienced hazmat technicians can also select which technology to employ as needed.

    Sampling

    Solids, liquids, containers, vials

    Sample types are solids/liquids, containers with the Raman probe, and vials. The flexible Raman probe and integrated vial holder are there for versatile sampling options, alongside SERS support for low-concentration work.

    Powder sample being placed with a spatula onto the VipIR sampling interface beneath the raised clamp
    Powder at the sampling interface
    Solids & liquids

    Single sampling interface

    Smart Spectral Processing through a single sampling interface: both spectra from one placement.

    Containers

    Flexible, integrated Raman probe

    For non-invasive identification through containers.

    Vials

    Integrated vial holder

    For easy analysis within standard vials.

    Low concentrations

    SERS technique support

    Surface-enhanced Raman spectroscopy (SERS) for low concentrations (such as synthetic opioids/fentanyl).

    Library
    39,000+
    Chemical spectra on board

    An extensive library of drugs, TICs/TIMs, consumer products, chemical warfare agents and explosives, the same library behind both missions further down this page.

    • TICs
    • Narcotics
    • CWA
    • Explosives
    • Consumer Products
    • Chemicals

    Mixtures, not just pure compounds

    Sophisticated mixture analysis which can report all observable components in a mixture.

    Gloved hand placing a sample onto the VipIR sampling interface with the clamp raised
    Two missions

    Hazmat scene or port of entry

    The hardware and every specification are the same for both audiences; what changes is the job and the threats in front of it.

    Two hazmat responders in yellow protective suits handling a drum beside a green liquid spill
    Path A · Hazardous materials & CBRN

    Confidence on every call

    For hazmat teams facing an unknown, VipIR offers a dramatic improvement in unknown substance identification and accelerates decision-making on scene.

    • Identifies unknown solids or liquids, including toxic industrial chemicals, narcotics, explosives, and everyday chemicals
    • More accurate field identifications during hazmat response scenarios
    • Experienced hazmat technicians can select which technology to employ as needed
    • Team Leader app for fleet management: view results, sample data, review spectra, and more after samples are analyzed on scene
    Vehicle inspection lanes at a border crossing at night
    Path B · Customs & borders

    Simple, smart, and speedy

    For customs and border agents, VipIR accelerates decision-making at ports of entry, during inspections and high-stakes interdiction efforts.

    • Identifies unknown powders, solids, or liquids, including narcotics, cutting agents, and other concealed threats
    • A simplified, singular workflow lets users focus on their mission, and not which device is best suited for which sample
    • Individual methods remain available if desired
    • View results, sample data, and ensure your devices are operating in accordance with your SOPs

    Same instrument · Same specifications · Same 39,000+ spectra library

    Built for the field

    Rugged, decontaminable, connected

    A rugged, lightweight design for use in any conditions, a 5” touchscreen that shows the analysis as it runs, and wireless links that get the result to the rest of the team.

    908 Devices VipIR front view showing the touchscreen with a result list, three control buttons, sampling area and carry handle
    Ruggedness
    IP 67

    MIL-STD-810G. Rugged, lightweight design for use in any conditions.

    Decontamination
    Spray · wipe · dunk

    Spray, wipe-down or dunk with bleach or detergent.

    Weight
    9.5 lbs

    4.3 kgs. 14.6" × 8.6" × 5.8" (37.1 cm × 21.8 cm × 14.7 cm).

    Communications
    Wi-Fi · LTE

    Plus the Team Leader App, so data can be quickly shared with team members.

    Live on screen
    5” touchscreen

    Users can see analysis progress in real time and see results instantly on screen.

    VipIR screen reading Collecting Raman Sample, with a progress bar, a Raman spectrum and a signal strength meter
    Specifications

    The numbers

    Spectroscopy
    FTIR4000 – 650 cm-1, 4 cm-1 res
    Raman250 – 2875 cm-1, 7 – 10.5 cm-1 res
    Laser785 nm; up to 450 mW
    Sampling
    Sample TypeSolids/Liquids, Containers with Raman probe, Vials
    Raman Sampling OptionsFlexible sampling probe; SERS accessory; Integrated vial holder
    Library
    Library39,000+ chemical spectra
    TICs, Narcotics, CWA, Explosives, Consumer Products, Chemicals
    Physical
    Size14.6" × 8.6" × 5.8" (37.1 cm × 21.8 cm × 14.7 cm)
    Weight9.5 lbs (4.3 kgs)
    Display5” Touchscreen
    RuggednessIP 67, MIL-STD-810G
    DecontaminationSpray, wipe-down or dunk with bleach or detergent
    Power & data
    PowerRechargeable Li-ion battery and wall power adapter
    CommunicationsWi-Fi, LTE, Team Leader App

    VipIR is subject to export controls including those of the Export Administration Regulations of the U.S. Department of Commerce.

    FAQ

    Questions we hear

    What does Smart Spectral Processing actually do?
    SSP is a proprietary algorithm that actively integrates Raman and FTIR spectral data, using the results from one to refine, challenge, or confirm the interpretation of the other. 908 Devices says this interaction enhances the accuracy and reliability of chemical identification from a single sample. In the SmartID result, check marks indicate the result was confirmed by both Raman and FTIR.
    Can I choose a single technology?
    Yes, experienced hazmat technicians can also select which technology to employ as needed. The simplified SmartID workflow uses FTIR, Raman, and SSP together, and VipIR was built with flexibility in mind.
    Can VipIR identify through a container?
    VipIR has a flexible, integrated Raman probe for non-invasive identification through containers. “Containers with Raman probe” is a listed sample type, alongside solids/liquids and vials.
    What about very low concentrations, such as fentanyl?
    VipIR supports surface-enhanced Raman spectroscopy (SERS) for low concentrations (such as synthetic opioids/fentanyl). Request a quote and we will answer questions about SERS sampling.
    What is in the library, and can it handle mixtures?
    The library holds 39,000+ chemical spectra covering TICs, narcotics, CWA, explosives, consumer products and chemicals. VipIR also performs sophisticated mixture analysis which can report all observable components in a mixture.
    How is it cleaned after a hazmat entry?
    Decontamination is spray, wipe-down or dunk with bleach or detergent. The unit is rated IP 67 and MIL-STD-810G.
    How do results get to the rest of the team?
    VipIR has Wi-Fi, LTE and the Team Leader App. Wireless communication options and the Team Leader app allow for data to be quickly shared with team members, and teams can view results, sample data, review spectra, and more after samples are analyzed on scene.
    Are there export restrictions?
    Yes. VipIR is subject to export controls including those of the Export Administration Regulations of the U.S. Department of Commerce, which may restrict or require licenses for the export of product from the United States and their reexport to and from other countries.
    Next step

    Put VipIR on your unknowns

    Tell us whether you are equipping a hazmat team or an inspection lane, and what you need to identify. We will answer your questions on VipIR and send a quote.

    CONTACT US