No products in the cart.

  • Proengin · Fixed chem-bio detection

    Proengin AP4C-FB

    24/7 Chemical & Biological Detection System

    A mounted detector for gas and aerosol that provides continuous 24/7 monitoring for land or naval assets. Chemical and biological detection take place simultaneously in one two-in-one sensor, so there is no mode to switch, and alarm and sampling are fully automatic, with no action required from the operator.

    24/7Continuous detection
    sub-ppm rangeChemical sensitivity
    2-10 micronParticles · biological sensitivity
    No libraryNo filters
    Proengin AP4C-FB fixed chemical and biological detector, light-coloured housing seen from the front right
    One housing · chemical and biological, simultaneously
    How it works

    Two sensing channels, one housing

    Proengin describes the AP4C-FB as a two-in-one sensor: chemical and biological detection take place simultaneously, so there is no need to switch between the biological and chemical mode. Here is what each side covers.

    Channel A · Chemical

    Gas & aerosol

    A broad range of conventional and unconventional chemical threats, including chemical warfare agents, toxic industrial material and non-traditional agents such as Novichok.

    Chemical sensitivity
    sub-ppm range

    Detection

    • All nerve agents
    • All blister agents
    • All blood agents
    • All NTA such as Novichok
    • Choking agents
    • Numerous toxic industrials
    One housing Front view of the Proengin AP4C-FB housing with the sampling inlet on top

    Simultaneous · no mode switching

    • Flame spectrometryTechnology
    • No library / No filtersKey feature
    • Combined chem-bio detectionKey feature
    Channel B · Biological

    Biological particles

    Biological threats covered alongside the chemical ones: virus, bacteria and spore, monitored at the same time as the chemical channel.

    Biological sensitivity
    2-10 micron particles

    Detection

    • Virus
    • Bacteria
    • Spore

    Detection, not identification. The biological side is specified by particle size (2-10 micron particles); it detects these threats and does not identify or name a specific biological agent.

    1. 01

      Sample

      External & airtight sampling, running 24/7.

    2. 02

      Detect

      Chemical and biological detection take place simultaneously.

    3. 03

      Alarm

      Alarm and sampling is fully automatic and requires no action from the operator.

    4. 04

      Record

      Internal memory, 530 hours loop recording.

    This combined design results in lower procurement costs and less system complexity.Proengin

    Deployment

    On deck or on site

    Proengin built the AP4C-FB for continuous 24/7 monitoring of land or naval assets. The photos below are illustrative only.

    Illustrative aerial photo of a grey naval patrol ship under wayIllustrative image
    Platforms & vessels

    Land & naval

    • Land and naval platform
    • Capital ship
    • Fireboat
    Illustrative photo looking up between glass skyscrapersIllustrative image
    Fixed sites

    Sites & transit

    • Strategic site
    • Critical infrastructure
    • Transportation hub
    • Mass transit
    Harsh conditionsPerforms under dust, humidity, temperature
    24/7Continuous detection
    Quick response timeKey feature
    The housing

    Built to mount, wired to report

    Proengin lists flexible & easy integration among the key features. These are the numbers an integrator needs.

    Side view of the Proengin AP4C-FB housing showing the black connector box and a yellow warning label
    H 606mm / 23.85”
    Side view
    Height606mm23.85”
    Width400mm15.75”
    • Communication

      RS-485 interface

    • Data storage

      Internal memory, 530 hours loop recording

    • Sampling

      External & airtight sampling

    • Technology

      Flame spectrometry

    Kit options

    AP4C-FB system

    Main detector with visualization and control module (VCM).

    AP4C-FB detector

    Main detector without visualization and control module (VCM).

    Proengin offers deliverables from full system integration to ready to mount kit, plus integration of the AP4C-FB system to the end-user platform and prepaid maintenance and extended warranty options available upon initial acquisition. These are Proengin offerings; request a quote to discuss your requirement.

    Proengin AP4C family

    Fixed, chem-only or handheld

    The AP4C-FB is not the same unit as the AP4C-F or the handheld AP4C. The FB adds biological detection to a fixed housing; the F is the chemical-only fixed version; the AP4C is the handheld chemical detector.

    Specifications

    AP4C-FB specifications

    Detection
    TechnologyFlame spectrometry
    Detection rangeCWA, TICs & TIMS, NTAs, Novichok, Binary agent, Precursor, Virus, Bacteria, Spore
    Chemical sensitivitysub-ppm range
    Biological sensitivity2-10 micron particles
    Detection list
    Chemical
    • All nerve agents
    • All blister agents
    • All blood agents
    • All NTA such as Novichok
    • Choking agents
    • Numerous toxic industrials
    Biological
    • Virus
    • Bacteria
    • Spore
    Operation
    Monitoring24/7 continuous detection
    Alarm & samplingFully automatic; requires no action from the operator
    Power & data
    CommunicationRS-485 interface
    Data storageInternal memory, 530 hours loop recording
    Key features
    SamplingExternal & airtight sampling
    IntegrationFlexible & easy integration
    Dimensions & environment
    Height606mm / 23.85”
    Width400mm / 15.75”
    ConditionsPerforms under harsh conditions (dust, humidity, temperature)
    Kit options (Proengin)
    AP4C-FB systemMain detector with visualization and control module (VCM)
    AP4C-FB detectorMain detector without visualization and control module (VCM)
    Accessories & services (Proengin)
    AP4C kitMobile handheld detector with gas and liquid sampling capability for dismounted personnel (AP4C page)
    IntegrationIntegration of the AP4C-FB system to the end-user platform
    MaintenancePrepaid maintenance and extended warranty options available upon initial acquisition
    FAQ

    Questions about the AP4C-FB

    Do I have to switch between chemical and biological mode?
    No. According to Proengin, chemical and biological detection take place simultaneously, so there is no need to switch between the biological and chemical mode; the two-in-one sensor monitors both at the same time.
    Does the AP4C-FB identify biological agents?
    The AP4C-FB is built for detection. Virus, bacteria and spore are among the threats it can detect, and biological sensitivity is specified as "2-10 micron particles". It does not identify or name a specific biological agent.
    How is the AP4C-FB different from the AP4C-F?
    Both are fixed units from the same housing family. The AP4C-FB combines chemical and biological detection; the AP4C-F is chemical only. See the AP4C-F page for that model.
    What does the operator have to do when it alarms?
    According to Proengin, alarm and sampling is fully automatic and requires no action from the operator.
    What data connections does it have?
    An RS-485 interface for communication, and internal memory with 530 hours loop recording.
    Does it come with a display or control module?
    Proengin lists two kit options: the AP4C-FB system (main detector with visualization and control module, VCM) and the AP4C-FB detector (main detector without the VCM). Request a quote to discuss which fits your requirement.
    Next step

    Watch for chemical and biological threats from one housing

    Tell us about the platform or site you need to protect and request a quote about the AP4C-FB.

    CONTACT US