Honeywell UltraRAE 3000+ is a benzene and VOC compound-specific monitor with extended PID detection and dual detection modes for hazmat and refinery safety.
The Honeywell UltraRAE 3000+ is built to detect volatile organic compounds (VOCs) and benzene specifically, using PID technology for accurate compound-specific readings.
Dual detection modes and real-time readouts give hazmat and refinery teams flexibility, and pre-tube technology supports benzene-specific measurement in environments where that distinction matters most.
Contact FarrWest for a quote.
| Performance | |
| Sensors | Photoionization sensor with standard 9.8 eV or optional 10.6 eV or 11.7 eV lamps |
| Alarms | 95dB buzzer at 12” (30 cm) and flashing red LED to indicate exceeded preset limits High: 3 beeps and flashes per second Low: 2 beeps and flashes per second STEL and TWA: 1 beep and flash per second Alarms latching with manual override or automatic reset Additional diagnostic alarm and display message for low battery and pump stall |
| Physical | |
| Size | 10” L x 3.0” W x 2.5” H (25.5 x 7.6 x 6.4 cm) |
| Weight | 26 oz (738 g) |
| Connectivity | |
| Wireless Range | Up to 15ft (5m) for BLE EchoView Host: LOS > 660 ft (200 m) ProRAE Guardian & RAEMesh Reader: LOS > 660 ft (200 m) ProRAE Guardian & RAELink3 Mesh: LOS > 330 ft (100 m) |
| Approvals & Warranty | |
| IP Rating | IP-65 unit running |
| Safety Certifications | USA and Canada: CSA, Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D Europe ATEX II 2G EEx ia IIC T4 IECEx CSA 10.0005 Ex ia IIC/IIB GbT4 |
| Other | |
| Running Time | 16 h of operation |
| 95dB buzzer at 12” (30 cm) and flashing red LED to indicate exceeded preset limits | High: 3 beeps and flashes per second |
| Sampling Pump | Internal, integrated flow rate at 400 cc/mn Sample from 100 (30m) horizontally or vertically |
| USA and Canada | CSA, Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D |
| Europe | ATEX II 2G EEx ia IIC T4 IECEx CSA 10.0005 Ex ia IIC/IIB GbT4 |
| Humidity | 0% to 95% relative humidity (non-condensing) |
UltraRae 3000 – Quick Guide to Benzene Measurements
UltraRAE 3000 User Guide
UltraRAE 3000 – How to Calibrate for Benzene Monitoring
The Honeywell UltraRAE 3000+ is one of the most advanced compound-specific monitors available, designed to deliver precise, real-time detection of volatile organic compounds (VOCs) and benzene, even at extremely low concentrations. Featuring an extended-range photoionization detector (PID) and dual-mode benzene detection, the UltraRAE 3000+ is essential for professionals working in hazardous environments such as refineries, chemical plants, spill response, and hazmat operations.
With a VOC detection range of 0.01 to 10,000 ppm and benzene-specific sensitivity as low as 10 ppb, this instrument enables early detection and safer decision-making. The UltraRAE 3000+ offers both a 60-second spot check and a 15-minute STEL (Short-Term Exposure Limit) monitoring mode, allowing users to quickly assess conditions or track longer-term exposure.
Using RAE Systems’ proprietary pre-tube filter technology, the UltraRAE 3000+ eliminates many of the inaccuracies found in older colorimetric tubes and gas chromatographs—delivering fast, reliable data you can trust in high-stakes situations.
Calibration, repair & warranty service in our San Antonio depot.