AEMC Instruments CA 6011 Point-to-Point Continuity Tester is a wrist-worn bonding and ground verification instrument for commissioning and troubleshooting electrical safety systems.
The CA 6011 Point-to-Point Continuity Tester is a unique wrist-worn instrument designed to verify conductive pathways and ground connections over long distances without traditional ground tester leads. Features 200 mA test current with automatic polarity reversal, lead compensation up to 5Ω, large two-color backlit display, programmable pass/fail thresholds (1Ω or 2Ω), audible and vibration alarms, and continuous testing mode. Ideal for commissioning and troubleshooting ground systems, bonding verification, lightning protection systems, and static bonding applications. Battery life supports approximately 30,000 measurements.
| Performance | |
| Continuity Mode Range 1 | (0.00 to 2.00) Ω |
| Continuity Mode Range 2 | (2.00 to 20.00) Ω |
| Continuity Resolution | 10 mΩ |
| Measurement Current (Continuity Mode Range 1) | 200 mA |
| Measurement Current (Continuity Mode Range 2) | 20 mA |
| Resistance Mode Range | (1.0 to 200.0) Ω |
| Resistance Mode Resolution | 100 mΩ |
| Resistance Mode Measurement Current | 10 mA |
| Power | |
| Open-Circuit Voltage | ±(4 VDC < U < 6 VDC) |
| Battery Life | 30,000 measurements typically |
| Power Supply | (4) 1.5 V AA / LR6 batteries |
| Physical | |
| Dimensions | (8.86 x 7.28 x 5.31) in / (225 x 185 x 135) mm |
| Weight | 12.34 oz (350 g) |
| Other | |
| Model | CA 6011 |
| Threshold | Programmable 1 Ω or 2 Ω |
| Compensation of Lead Resistance | Yes, < 5 Ω |
| Automatic Standby | 10 min / deactivatable |
| Safety Ratings | IEC 61557 parts 1 and 4, IEC 61010-1, IEC 61010-2-030, 300 V CAT IV |
Calibration, repair and maintenance for your detection instruments.